How to Turn Off Pilot Light on a Gas Fireplace

How to Turn Off Pilot Light on Gas Fireplace?

by

If you’re leaving your gas fireplace’s pilot light on all year, you might be wasting energy and money without realizing it. I used to do the same, until I discovered how much I could save by turning it off during warmer months. In this guide, we’ll cover why turning off the pilot light is a smart move, how to do it safely, and how to relight it when the colder season rolls in. Let’s dive into these simple steps to help you maximize efficiency!

Why You Should Turn the Pilot Light Off on Your Gas Fireplace

Turning off the pilot light on your gas fireplace during the warmer months is a great way to save energy and money. When left on, the pilot light continues to use a small amount of gas, even when the fireplace isn’t in use. I remember realizing that I could lower my gas bill just by turning it off when I didn’t need it. Plus, it reduces wear on the components, keeping your fireplace in better shape for longer. Turning off the pilot light is a simple, effective way to keep your fireplace efficient year-round.

Turning off Pilot Light on a Gas Fireplace

Save Energy and Money – Don’t Leave Your Pilot Light Always On

Leaving the pilot light on can add unnecessary costs to your energy bill, especially when the fireplace isn’t being used for long periods. Even though the flame is small, it burns gas constantly. Turning it off can save you both gas and money over time. Plus, during warmer months, there’s no need to keep it running when you don’t need the extra heat. It’s a small adjustment that can make a big difference!

How to Turn Off Pilot Light on a Gas Fireplace

Turning off the pilot light on your gas fireplace is a simple process that just takes a few steps. Let’s walk through them so you can safely shut it off.

Step 1: Locate the Gas Control Knob

Find the control knob on your fireplace. It’s usually located near the bottom of the unit. This knob controls the gas flow to the pilot light

Step 2: Turn the Knob to “Off”

Once you’ve found the control knob, turn it to the “Off” position. This cuts off the gas supply to the pilot light, extinguishing the flame.

Step 3: Wait for the Pilot Light to Go Out

After turning the knob, wait a few moments to ensure the pilot light goes out completely. This confirms that the gas flow has stopped.

Step 4: Turn Off the Gas Supply (Optional)

For added safety, you can turn off the main gas valve to the fireplace if you won’t be using it for a long time. This is especially useful during the summer months.

How to Relight the Pilot Light in Gas Fireplace

When you’re ready to use your fireplace again, relighting the pilot light is just as easy as turning it off. Here’s how to do it in a few simple steps.

Step 1: Turn the Gas Control Knob to “Pilot”

Start by turning the gas control knob to the “Pilot” position. This allows a small amount of gas to flow for lighting.

Step 2: Press and Hold the Control Knob

Press and hold the control knob to release gas into the pilot assembly. While holding it, use a long lighter to ignite the pilot light. Continue holding the knob for about 30 seconds to ensure the flame stays lit.

Step 3: Turn the Knob to “On”

Once the pilot light is steady, release the control knob and turn it to the “On” position. This will allow gas to flow to the burner, and your fireplace will be ready for use.

Bottom Line

Turning off your gas fireplace’s pilot light when not in use is an easy way to save energy and reduce costs. Relighting it when needed is just as simple, with a few quick steps to follow. Regularly managing your pilot light helps keep your fireplace efficient and ready for those cozy nights.

Josh Frank
Latest posts by Josh Frank (see all)

Leave a Comment